Log File Example; Session Log Example - Avaya G250 Administration

Log file example

The following example enables the logging of system messages to a log file in the flash memory
and creates a filter to restrict receipt of messages from the boot application to those with
severity informational or more severe, and messages from the cascade application to
those with severity alert or more severe.
G350-001(super)# set logging file enable
Done!
G350-001(super)# set logging file condition boot informational
Done!
G350-001(super)# set logging file condition cascade alert
Done!

Session log example

The following example enables a session log for a user wishing to debug the ISAKMP
application, while only receiving messages of severity error or stronger for all other
applications. The user therefore sets the default severity for all applications to error, and then
sets the severity of the ISAKMP application to informational. Finally, the user displays the
filter settings.
G350-001(super)# set logging session enable
Done!
G350-001(super)# set logging session condition all Error
Done!
G350-001(super)# set logging session condition ISAKMP Informational
Done!
G350-001(super)# show logging session condition
******************************************************
*** Message logging configuration of CLI sink ***
Sink Is Enabled
Sink default severity: Error
Application
-------------------------------------------
ISAKMP
! Severity Override
! Informational
Configuring logging filters
Issue 3 February 2007 199