Dhcp Client Configuration - Avaya G250 Administration

Figure 13: Fixed connection to broadband Internet using G250/G350 as DHCP client

DHCP client configuration

1. Enter the context of the Fast Ethernet interface:
G350-001# interface FastEthernet 10/2
G350-001(config-if:FastEthernet 10/2)#
2. Optionally, configure DHCP client parameters. If you do not configure these parameters,
their default values are used:
Use the ip dhcp client client-id command to set the client-identifier for the
●
DHCP client. By default, the client-identifier is usually the MAC address of the G250/
G350 Fast Ethernet interface.
Use the ip dhcp client hostname command to set the host name for the DHCP
●
client. By default, the DHCP client uses the G250/G350's hostname.
Use the ip dhcp client lease command to set the lease requested by the DHCP
●
client. The lease is the length of time that the IP address provided by the DHCP server
remains in effect. By default, the client does not request a specific lease from the
DHCP server, and uses the lease set by the DHCP server.
Configuring DHCP client
Issue 3 February 2007 181