Avaya G250 Administration page 261

2. Use the description command to enter a description for the track list.
G350-001(config-track list 10)# description "track list rtr-5 and rtr-6"
Done!
3. Use the object command to add an object tracker to the list.
Note:
The object tracker can be a simple one tracking a single RTR, or a track list.
Note:
G350-001(config-track list 10)# object 1
Done!
4. Repeat step 3 to add as many object trackers as you require, up to a maximum of 50.
5. If you specified a Threshold method of calculation in step 1, use the threshold count
command to enter the threshold values. For example, to specify that:
the state of the object tracker will change from down to up if 2 or more hosts are up,
●
and
the state of the object tracker will change from up to down if 1 or less hosts are up:
●
G350-001(config-track list 10)# threshold count up 2 down 1
Done!
Note:
Object trackers operate indefinitely once they are defined. To stop the operation
Note:
of an object tracker, use the no track command to delete the object tracker.
Object tracking
Issue 3 February 2007 261