Avaya G250 Administration page 153

Table 26: Module-port values in SLS station configuration mode (continued)
Gateway
G350
* You cannot select these modules/ports if they are already assigned as
DID trunks.
Examples
set port v305 sets the previously-administered analog station "1234567" to the
●
first physical analog station port on the G250-Analog gateway.
set port v401 sets the previously-administered dcp station "1234567" to the first
●
physical DCP station port on the G250-DCP gateway.
set port v302 sets the previously-administered analog station "1234567" to the
●
first physical analog station port on the G250-BRI gateway.
4. Type set cor cor to set the class of restriction (COR) for this extension, where cor is
any of the following:
emergency
●
internal (default)
●
local
●
toll
●
unrestricted
●
There exists a hierarchical relationship among the calling-restriction categories. As you
move from the most restricted COR (emergency) to the least restricted (unrestricted),
each level increases the range of dialing abilities. For example, toll includes the dialing
privileges of local, internal, and emergency. See
(COR) permissions
permissions.
Media Analog station
module ports
V702, V703
MM314
MM711 8 possible ports
MM712
MM714 4 possible ports
(ports 1-4)
MM716 24 possible ports
MM717
on page 119 for the hierarchical relationship among the COR
DCP
*
24 possible ports
8 possible ports
24 possible ports
Figure 8: Inherited Class of Restriction
Issue 3 February 2007
Configuring SLS
2 of 2
153