Configuring logging
Displaying how the session logging is configured
Type the show logging session condition command. This command displays whether
session logging is enabled or disabled, and lists all filters defined for session logging.
G350-001(super)# show logging session condition
******************************************************
*** Message logging configuration of SESSION sink ***
Sink Is Enabled
Sink default severity: Warning
Session source ip: 172.16.1.231
Session logging message format
Session logging messages are arranged chronologically and have the following format:
01/18/2005,10:49:03:SWITCHFABRIC-Notification: Port Connection Lost on Module 10
port 8 was cleared
01/18/2005,10:55:09:CLI-Notification: root:
Each message provides the following information:
The date and time (if available)
●
The logging application
●
The severity level
●
The message text
●
Note:
The user enabling the log will only see entered commands with a user-level no
Note:
higher than the user's own privileges. For example, a user with read-write
privileges will not see entered commands having admin user level.
194 Administration for the Avaya G250 and Avaya G350 Media Gateways
set port disable 10/9