Configuring IPSec VPN
Full solution — hub-and-spoke with VPN
The full solution consists of a hub-and-spoke with VPN for data and VoIP control backup.
In this topology:
There is a direct WAN connection to the Main Office for VoIP bearer and as primary VoIP
●
control connection.
The Broadband Internet connection uses cable or DSL modem, with a static public IP
●
address.
There is a VPN tunnel to the hub over the Internet for intranet data, and as backup
●
connection for VoIP control.
The local hosts access the Internet directly through the local broadband connection.
●
The PSTN connection backs up the voice bearer.
●
Figure 45: Full solution: hub-and-spoke with VPN for data and VoIP control backup
Configuring hub-and-spoke with VPN for data and VoIP control backup
1. Configure the Branch Office as follows:
The default gateway is the Internet interface.
●
496 Administration for the Avaya G250 and Avaya G350 Media Gateways