Appendix C: Running The Avaya Installation Wizard (Avaya Iw); Accessing Avaya Iw - Avaya G450 Installing And Upgrading

Appendix C: Running the Avaya Installation
The Avaya IW is a web-based installation wizard that is used with the Avaya G450 Media
Gateway to perform initial configuration tasks and to upgrade software and firmware. The Avaya
IW is designed for use with systems that contain an S8300 Server, operating in either ICC or
LSP mode. You can use Avaya IW to configure the Avaya G450 Media Gateway or to upgrade
an installed S8300 with new Avaya Communication Manager (CM) software and/or G450
firmware. If you have an EPW (see
(EPW) on page 24), you will be able to upload configuration parameters from the EPW to AIW
as part of your AIW session.

Accessing Avaya IW

1. Connect a laptop computer to the Services port of the S8300, using a crossover cable.
2. Make sure the laptop is configured as follows:
IP Address: 192.11.13.5
●
NetMask: 255.255.255.252
●
Disable DNS
●
Clear the primary WINS and secondary WINS IP Addresses
●
Disable the Proxy Server in the Internet Explorer
●
3. Launch Internet Explorer on the laptop and type the following URL to access the S8300
Server Home Page: http://192.11.13.6.
The welcome screen for Avaya Integrated Management appears.
4. Click Continue. The Logon screen for Integrated Management appears.
5. Enter the appropriate login name and password.
6. Ask a customer representative for a login name and password that the customer would like
for the superuser login. If you are a business partner, you can also repeat this procedure to
add the dadmin login.
Note:
Make sure the customer can change this login, its password, or its permissions
Note:
later.
Wizard (Avaya IW)
Obtaining the Electronic Preinstallation Worksheet
Issue 2 June 2008 151