Avaya G250 Administration page 116

Configuring Standard Local Survivability (SLS)
Note:
Set the name of the media gateway consistent with the Name field on the Media
Note:
Gateway administration form in Communication Manager (add
media-gateway) and with the name used in the set system name command
(gateway CLI).
4. Type the IP address of the gateway in the IP Address field.
5. Submit the form.
6. At the SAT, type change system-parameters mg-recovery-rule 1 and press
Enter to display the System Parameters Media Gateway Automatic Recovery Rule
form.
change system-parameters mg-recovery-rule 1
Recovery Rule Number: 1
Rule Name: _____________
Migrate H.248 MG to primary: immediately
Minimum time of network stability: 3
WARNING: The MG shall be migrated at the first possible opportunity. The MG may
be migrated with a number of active calls.
paths preserved, but no additional processing of features shall be honored. The
user must hang up in order to regain access to all features.
NOTE: set 'Migrate H.248 MG to primary' to Blank to disable rule.
7. Type a description of the rule in the Rule Name field.
8. Set the Migrate H.248 MG to primary field to immediately.
Note:
This field value (immediately) is only one of the four (4) possible choices. See
Note:
the Administrator Guide for Avaya Communication Manager (03-300509) for
more information on the values for this field.
9. Submit the form.
116 Administration for the Avaya G250 and Avaya G350 Media Gateways
SYSTEM PARAMETERS MEDIA GATEWAY AUTOMATIC RECOVERY RULE
These calls shall have their talk
Page 1 of 1