Avaya G250 Administration page 380

Configuring monitoring applications
ICMP type and code
To apply the rule to a specific type of ICMP packet, use the icmp command. This command
specifies an ICMP type and code to which the rule applies. You can specify the ICMP type and
code by integer or text string. For example:
G350-001(super-Capture 520/ip rule 20)# icmp Echo-Reply
Done!
G350-001(super-Capture 520/ip rule 20)#
To apply the rule to all ICMP packets except the specified type and code, use the not form of
this command. For example:
G350-001(super-Capture 520/ip rule 20)# not icmp 1 2
Done!
G350-001(super-Capture 520/ip rule 20)#
Fragment
To apply the rule to non-initial fragments, use the fragment command. You cannot use the
fragment command in a rule that includes UDP or TCP source or destination ports. For
example:
G350-001(super-Capture 520/ip rule 15)# fragment
Done!
G350-001(super-Capture 520/ip rule 15)#
380 Administration for the Avaya G250 and Avaya G350 Media Gateways