Avaya G250 Administration page 171

hnpa - 7-digit North American Numbering Plan calls.
●
intl - Public-network international number calls.
●
iop - International operator calls.
●
locl - Public-network local number calls.
●
natl - Non-North American Numbering Plan calls.
●
op - Operator calls.
●
svc - Service calls.
●
Note:
Each level of call includes the previous level's dialing privileges. For example,
Note:
locl has the calling privileges of iop, intl, etc. See
of Restriction (COR) permissions
relationship between the various dial types and the COR permissions.
3. Type set min-length length to define the minimum length of the dialed string.
4. Type set max-length length to define the maximum length of the dialed string. This
must be set prior to the minimum length if the minimum length is larger than the default
value.
5. Type set tgnum tgnum to designate a trunk-group for which this dialed string is
assigned.
6. Type set deny no to permit stations to originate outgoing trunk calls.
7. At the command-line type set insert-digits digits to define the number of digits to
insert into a dialed string, if required.
8. Type set delete-digits digits to define the number of digits to be deleted from a
dialed string, if required.
Note:
You may either insert or delete digits, but not both.
Note:
9. Type show to check the outbound dial-pattern string administration.
The report lists the dial-pattern parameters:
Dialed-String/Deny
------------------
5381000/n
5385000/n
10. Type exit to leave the dial-pattern context in SLS.
on page 119 for an illustration of the
Min/Max Trunk
Length Type Group
------ ---- -----
9/9 locl
9/9 locl
Figure 8: Inherited Class
Delete/Insert
Digits
----------------------
2 1/303
3 1/720
Issue 3 February 2007
Configuring SLS
171