Call Processing In Sls Mode - Avaya G250 Administration

Media gateways

Hide thumbs Also See for G250:

Table of Contents

The new Avaya 96xx IP phone family is not directly referenced in the G250/G350 CLI. When

you administer these phones via the CLI, use the following mapping:

Call processing in SLS mode

In survivable mode, SLS provides only a limited subset of Avaya Communication Manager call

processing functionality:

Limited call routing through a Survivable ARS Analysis Table (in the PIM application or

through the CLI) and COR calling permissions.

Inbound calls are directed in one of three ways:

- Using the Incoming-Routing form.

- Using the Set Incoming-Destination on the Trunk group form, which enables

mapping to a given station.

- Inbound calls are directed to a previously-administered pool of available stations (the

Survivable Trunk Dest? field is y on the Station form). The search algorithm is

circular so that the incoming calls are fairly distributed.

SLS permits 911 calls, but the specific location information is not transmitted to

the Public Service Answering Point (PSAP) but only the general trunk-identifying

information. Emergency personnel will have a general location associated with

the trunk (for example, a building address), but nothing more specific like the

room or office number. Also, if a 911 call disconnects for any reason, emergency

personnel cannot reliably call the originator back.

A small business office's address is sufficient from the perspective of emergency

Communication Manager Feature Access Codes for ARS, Contact Closure, and Hold

Acts as an H.323 Gatekeeper that enables IP endpoints to register simultaneously

Direct Inward Dialing

CLI interface name

Issue 3 February 2007