Disabling Syslog Servers; Deleting Syslog Servers - Avaya G250 Administration

sec (Security)
syslog (System Logging)
uucp (Unix-to-Unix Copy Program)
news (Usenet news)
user (User Process)
4. Optionally, limit access to the Syslog server output by typing the set logging server
access-level command, followed by an access level (read-only, read-write, or admin)
and the IP address of the Syslog server. If you do not define an access level, the default
read-write level is used.
G350-001(super)# set logging server access-level read-only 147.2.3.66
Done!
Only messages with the appropriate access level are sent to the Syslog output.
5. Optionally define filters to limit the types of messages received (see
filters on page 195).

Disabling Syslog servers

Type the set logging server disable command, followed by the IP address of the
Syslog server.
G350-001(super)# set logging server disable 147.2.3.66
Done!

Deleting Syslog servers

You can delete a Syslog server from the Syslog server table. Type the clear logging
server command followed by the IP address of the Syslog server you want to delete.
G350-001(super)# clear logging server 147.2.3.66
Done!
Configuring a Syslog server
Configuring logging
Issue 3 February 2007 189