Avaya G250 Administration page 340

Configuring monitoring applications
Table 46: RTP statistics application configuration (continued)
Name
Clear
QoS Trap Rate
Limiter:
Token Interval
Bucket Size
Session Table:
Size
Reserved
Min Stat Win
340 Administration for the Avaya G250 and Avaya G350 Media Gateways
Description
The QoS clear trap boundary. That is, the reduced number of active
sessions with QoS faults that triggers a QoS clear trap to be sent
after a QoS fault trap was sent.
The displayed token interval is in seconds. The maximum long term
trap rate, expressed as an interval in seconds. In the example shown,
the maximum long term trap rate is one trap every 10 seconds.
The maximum number of tokens stored in the token bucket of the trap
rate limiter. This item limits the size of a QoS trap burst.
The maximum number of RTP session entries held in the session
table in the gateway RAM.
The number of rows in the session table that are reserved for
sessions with QoS problems. In the example shown, the table size is
128 and the reserved number is 64. If, from 1000 sessions only 300
had QoS problems, the session table will hold, at least, the last 64
sessions that had QoS problems. Note that if the last 128 sessions all
had QoS problems, all rows in the session table will be filled with
sessions that had QoS problems.
The minimum statistic window configured for the RTP statistics
application. That is, the minimum number of observed RTP
sequence increments for which the application evaluates packet
loss.
2 of 2