Avaya G250 Administration page 353

Table 49: QoS Trap output fields (continued)
Label Description
The gateway up time.
4
The trap name, which indicates that this is a QoS
5
trap.
The local gateway PMI.
6
The remote VoIP engine, gateway PMI or IP phone
7
address.
The duration of the RTP session.
8
format: gwt@<MGP-address>.
9
The local extension number and conference ID in
10
format <conference ID>:<extension number>.
Conference calls can involve more than one entry in
the session table. Multiple sessions belonging to the
same conference call can usually be identified by a
common conference ID.
Notes:
The phone string data is received from Avaya
●
Communication Manager if VMON is
configured.
If you are not running VMON, you can cause
●
Avaya Communication Manager to send the
phone string data by configuring a dummy
RTCP-server for the region, with a 'localhost' ip
address (127.x.x.x).
An arbitrary index number for the session in the
11
session table.
The total number of sent traps since the application
12
was enabled.
The number of traps that were dropped by the trap
13
rate limiter since the application was enabled. This
item can be used, when analyzing received traps
logs, to identify missing traps (due to network
conditions or the rate limiter). This is also displayed
by the show rtp-stat summary command.
The number of times the application sampled the
14
VoIP engine (RTP receiver) statistics.
Configuring and analyzing RTP statistics
From the trap example
sysUpTime.0 = Timeticks:
(43147723) 4 days,
23:51:17.23
snmpTrapOID.0 = OID: av
RtpQoSTrap
avRtpSessionLocAddrV4.0 =
IpAddress: 135.8.118.252
avRtpSessionRemAddrV4.0 =
IpAddress: 135.8.76.107
Duration: 00:04:33
avRtpSessionCname.0 =
STRING: gwp@135.8.118.252
avRtpSessionPhone.0 =
STRING: 69:2011
avRtpSessionDebugStr.0 =
STRING: Id{35}
11
Traps{24 /0}
12
Traps{24/0
Stats{S 54
Issue 3 February 2007
}
2 of 4
353