Avaya G250 Administration page 612

FIPS
20. Disable the SSH service using the no ip ssh command and confirm the operation.
G350-001(super)# no ip ssh
This will prevent future remote SSH sessions and disconnect all active SSH
sessions - do you want to continue (Y/N)? y
Shutting down all active sesssions
Done!
21. Disable the CNA using the no cna testplug-service command.
.
G350-001(super)# no cna testplug-service
Done!
22. Disable the SLS, using the set survivable-call-engine disable command.
G350-001(super)# set survivable-call-engine disable
Survivable Call Engine is disabled
23. Configure other module configuration-related parameters, such as: VoIP, Media, L2
switching, E1/T1.
24. Determine which interfaces will be used for clear-text data, and which for encrypted data.
Note that private interfaces such as Vlans should be clear, while public interfaces such as
FastEthernet 10/2 and Serial X/Y should be encrypted.
25. Configure additional interfaces, including the interfaces' IP addresses.
G350-N(super)# interface fastethernet 10/2
G350-N(super-if:FastEthernet 10/2)# ip address 10.0.0.1 255.255.255.0
Done!
G350-N(super)# interface serial 2/1:1
G350-N(super-if:serial 2/1:1)# encapsulation ppp
Done!
G350-N(super-if:serial 2/1:1)# ip address 1.0.0.1 255.255.255.252
Done!
G350-N(super-if:serial 2/1:1)# exit
G350-N(super)#
26. Remove all unnecessary users, as follows:
a. Use the show username command to list CLI users.
G350-N(super)# show username
User
account
--------------------------------
root
b. If there are redundant CLI users, use the no username command to delete them.
Note that you cannot delete the root user.
612 Administration for the Avaya G250 and Avaya G350 Media Gateways
Access Account
level type
----------- ----------
admin local
Active Authent.
method
------ ----------
yes password