Appendix C: Running The Avaya Installation Wizard (Avaya Iw); Accessing Avaya Iw - Avaya G350 Installing And Upgrading

Appendix C: Running the Avaya Installation
The Avaya IW is a web-based installation wizard that is used with the Avaya G350 Media
Gateway to perform initial configuration tasks and to upgrade software and firmware. The Avaya
IW is designed for use with systems that contain an S8300 Media Server, operating in either
ICC or LSP mode. You can use Avaya IW to configure the Avaya G350 Media Gateway or to
upgrade an installed S8300 with new Avaya Communication Manager (ACM) software and/or
G350 firmware. If you have an EPW (see
(EPW) on page 22), you will be able to upload configuration parameters from the EPW to AIW
as part of your AIW session.

Accessing Avaya IW

1. Connect a laptop computer to the Services port of the S8300, using a crossover cable.
2. Make sure the laptop is configured as follows:
IP Address: 192.11.13.5
●
NetMask: 255.255.255.252
●
Disable DNS
●
Clear the primary WINS and secondary WINS IP Addresses
●
Disable the Proxy Server in the Internet Explorer
●
3. Launch Internet Explorer on the laptop and type the following URL to access the S8300
Media Server Home Page: http://192.11.13.6
4. Enter the appropriate login name and password.
5. Ask a customer representative for a login name and password that the customer would like
for the superuser login. If you are a business partner, you can also repeat this procedure to
add the dadmin login.
Note:
Make sure the customer can change this login, its password, or its permissions
Note:
later.
Wizard (Avaya IW)
Obtain the Electronic Preinstallation Worksheet
Issue 4 February 2007 149