Avaya G250 Administration page 140

Configuring Standard Local Survivability (SLS)
7. Scroll to page 10 and read the value of the Date Format on Terminals field (summarized
in Table
8. At the SAT, type display media-gateway n, where n is the administered number of
the media gateway of interest, and press Enter to display the Media Gateway form.
9. Read the Max Survivable IP Ext field value (summarized in
Table 20: General system parameters data to assemble for SLS
CM Form
Ip-codec-set
System-parameter features
Media Gateway
Collecting ARS dial patterns data
To gather the route patterns and ARS analysis in Communication Manager, you must first know
which trunk groups are assigned to the gateway of interest. Then:
1. At the SAT, type list route-pattern trunk-group n, where n is an administered
trunk group, and press Enter to display the administered route pattern(s).
2. For the first preference for this route-pattern entry, read the values of the following fields
(described in
a. No Deleted Digits
b. Inserted Digits
140 Administration for the Avaya G250 and Avaya G350 Media Gateways
20).
Page
All
10
1
Table 21):
Field Name Notes
All fields There can be up to 7 distinct
codec-sets in use in the system.
However only one codec set is
active for the network region in
which the gateway is located.
SLS only supports two codecs:
●
●
Date Format on Applies to 64xx and 24xx DCP
Terminals terminals, and to 46xx IP
terminals
Max Survivable IP Maximum IP phone registrations
Ext allowed
Table 20).
G.711 A-law
G.711 U-law