Configuring The Sls Data Through The Cli - Avaya G250 Administration

Configuring Standard Local Survivability (SLS)
Table 22: Incoming call handling data to gather for SLS
CM Form
Incoming Call
Handling Treatment
Incoming Call
Handling Treatment
Incoming Call
Handling Treatment
Incoming Call
Handling Treatment
Trunk Group

Configuring the SLS data through the CLI

The command line interface (CLI) has a root-level context of survivable-call-engine for
administering the SLS data set. After you type survivable-call-engine at the CLI prompt
and press Enter, the prompt changes to indicate that you are in the survivable-call-engine
context. Once in this context, seven additional sub-contexts provide for station and trunk
administration to minimize the need to type in a long command string.
station context that is invoked by typing station extension class and pressing
●
Enter to enter a second-level subcontext for administering stations.
trunk-group context that is invoked by typing trunk-group tgnum group-type and
●
pressing Enter to enter the second-level subcontext for administering trunk groups.
ds1 context that is invoked by typing ds1 port-address and pressing Enter to enter the
●
second-level subcontext for administering DS1 trunks.
sig-group context that is invoked by typing sig-group sgnum and pressing Enter to
●
enter the second-level subcontext for administering signaling groups.
bri context that is invoked by typing bri port-address and pressing Enter to enter the
●
second-level subcontext for administering ISDN BRI links.
142 Administration for the Avaya G250 and Avaya G350 Media Gateways
Page Field Name
1 Called Number
1 Called Len
1 Del
1 Insert
1 Digit Handling (In/Out)
Notes
Dial string entry that is used to
match a pattern on inbound
trunk calls.
Maximum length of the
user-dialed number that the SLS
call engine collects to match to
the dialed string. Default =
minimum length is defined to be
equal to the length of the dialed
string.
Specifies the number of dialed
digits to be deleted from the
beginning of the string.
Default = 0.
Specifies the digit string to be
inserted at the beginning of the
dialed string. Default = 0.
Defines the overlap receiving
rules. Needed to set the "mode"
field in the IncomingRouting
table. Default = enbloc.