Rmon Cli Commands; Rmon Configuration Examples - Avaya G250 Administration

Configuring monitoring applications

RMON CLI commands

Use the following commands to configure RMON. For more information about these
commands, see Avaya G250 and Avaya G350 CLI Reference, 03-300437.
Use the rmon alarm command to create an RMON alarm entry.
●
Use the rmon event command to create an RMON event entry.
●
Use the rmon history command to create an RMON history entry.
●
Use the show rmon alarm command to display all RMON alarm entries.
●
Use the show rmon event command to display RMON event entries.
●
Use the show rmon history command to display RMON alarm entries.
●
Use the show rmon statistics command to display RMON statistics.
●

RMON configuration examples

The following example creates an RMON alarm entry:
G350-003(super)# rmon alarm 1 1.3.6.1.2.1.16.1.1.1.5.16777216 20 delta
rising-threshold 10000 32 falling-threshold 1000 32 risingOrFalling root
alarm 1 was created successfully
The following example creates an RMON event entry:
G350-003(super)# rmon event 32 log description "Change of device" owner root
event 32 was created successfully
The following example creates an RMON history entry with an index of 80 on port 24 of the
module in slot 6, recording activity over 60 intervals (buckets) of 20 seconds each.
G350-003(super)# rmon history 80 6/24 interval 20 buckets 60 owner root
history index 80 was created successfully
The following example displays information about an RMON alarm entry:
G350-003(super)# show rmon alarm 1
alarm
alarm 1 is active, owned by root
Monitors ifEntry.1.16777216 every 20 seconds
Taking delta samples, last value was 0
Rising threshold is 10000, assigned to event # 32
Falling threshold is 1000, assigned to event # 32
On startup enable rising or_falling alarms
332 Administration for the Avaya G250 and Avaya G350 Media Gateways