Poe Configuration Examples - Avaya G250 Administration

Configuring PoE
Note:
If another PoE-enabled device (such as a C364T-PWR switch) is connected to a
Note:
port, the show powerinline command may incorrectly show the port power
status as Delivering Power. To disable inline power for a port connected to a
C364T-PWR, use the command set port powerinline disable.

PoE configuration examples

Enabling PoE on a G250 port:
G250-001(super)# set port powerinline 10/4 enable
Load detection process on port 10/4 is enabled.
Enabling PoE on a G350 port:
G350-001(super)# set port powerinline 6/12 enable
Load detection process on port 6/12 is enabled.
Disabling PoE on a G250 port:
G250-001(super)# set port powerinline 10/5 disable
Load detection process on port 10/5 is disabled.
Disabling PoE on a G350 port:
G350-001(super)# set port powerinline 6/12 disable
Load detection process on port 6/12 is disabled.
Configuring PoE priority on a G250 port:
G250-001(super)# set port powerinline priority 10/3 high
Powering priority on port 10/3 was set to High.
Configuring PoE priority on a G350 port:
G350-001(super)# set port powerinline priority 6/14 high
Powering priority on port 6/14 was set to High.
282 Administration for the Avaya G250 and Avaya G350 Media Gateways