Configuring WAN interfaces
Figure 21: Object tracking configuration workflow
rtr
type
frequency
dscp
next-hop
source-address
wait-interval
fail-retries
success-retries
rtr-schedule
track id rtr
description
track id list
description
object 1
.
.
object n
threshold count
Object tracking maintenance
Using the show commands, you can display RTR and Object Tracking configuration, and
enable RTR and object tracking logging to a CLI terminal.
Use the show rtr configuration command to display RTR configuration values,
●
including all defaults, for a specific RTR operation or for all RTR operations.
Use the show rtr operational-state command to display the global operational
●
status of the RTR feature, for a specific RTR operation or for all RTR operations.
Use the show track command to display tracking information.
●
Viewing RTR and object trackers logging
1. Use the set logging session enable command to enable logging to the CLI
terminal.
G350-001# set logging session enable
Done!
CLI-Notification: write: set logging session enable
262 Administration for the Avaya G250 and Avaya G350 Media Gateways