Administering Signaling-Group Parameters - Avaya G250 Administration

20. For a DS1 circuit, type set trunk-hunt type to specify the trunk-hunting search within
a facility in an ISDN trunk group or through a non-ISDN digital trunk group, where type is
any of the following:
ascend: A linear search from the lowest to the highest numbered available channels.
●
circular: A circular search beginning with the point at which the search previously
●
ended. When the search has reached the top of the channel list, it resumes at the
bottom of the list in wrap-around fashion.
descend: A linear search from the highest to the lowest numbered available channels.
●
21. Type show to check the trunk-group administration.
The report lists the trunk-group parameters.
This example shows a G250-BRI that has all four trunk members assigned to one
●
trunk-group:
Group Type
----- ---------- ------ ---- ------------------- ------- ------
1
Name = Willow Street 2
Ports = v401,v402,v417,v418
Codeset
Display
-------- -------- ---------- --------------- ------ ---- ------ ------ --------
codeset6 codeset6 exclusive
This example shows a G250-DS1 that has twelve port members assigned as
●
t1-inband signaling:
Group Type
----- ---------- ------ ---- ------------------- ------- ------
1
Name = Willow Street 2
Ports = v401,v402,v403,v404,v405,v406,v407,v408,v409,v410,v411,v412
Incoming-Dest Incoming-Dial Trunk-Hunt
------------- ------------- ----------
22. Type exit to leave the trunk-group context in SLS.

Administering signaling-group parameters

1. Type sig-group sgnum, where sgnum is any number 1-650.
The command line prompt changes to sls-sig-group <sgnum>. If you want to remove
the signaling group from the SLS administration, type exit to leave the second-level
sig-group context to return to the (super-survivable-call-engine)# context, and
then type clear sig-group sgnum.
Dial Tac
bri - *99
Codeset Channel
National Preference Handling
Dial Tac
t1inband dtmf *96
- no
Supervision
-
Digit Japan
Discon Name Number Format Hunt
enbloc-enbloc no
Supervision
wink/immediate
ascend
Configuring SLS
Treat Insert
- -
Send Send Number Trunk
yes yes public ascend
Treat Insert
- -
Issue 3 February 2007 169