Avaya G250 Administration page 613

c. Use the show snmp user command to list SNMPv3 users.
G350-N(super)# show snmp user
EngineId: 80:00:1a:e9:03:00:04:0d:29:ca:61
User Name: initial
Authentication Protocol: none
Privacy Protocol: none
Storage Type: nonVolatile
Row Status: active
d. If there are redundant local SNMP users, use the no snmp-server user command
to delete them.
G350-N(super)# no snmp-server user initial v3
Done!
e. If there are redundant remote SNMP users, use the no snmp-server
remote-user command to delete them.
G350-N(super)# no snmp-server remote-user john
00:02:00:81:00:d0:00:4c:18:00
Done!
27. Disable SNMPv1, using the no snmp-server community command.
G350-N(super)# no snmp-server community
Done!
28. Define SNMPv3 parameters for existing SNMPv3 users.
Note:
SNMPv3 users must be authenticated using the MD5 hash function (auth md5).
Note:
Other combinations (noauth, auth sha1, priv des56) are not permitted in FIPS
mode.
G350-N(super)# snmp-server engineID 00:04:0d:29:c5:a5
Done!
G350-N(super)# snmp-server group initial v3 auth read iso write iso notify
iso
Done!
G350-N(super)# snmp-server user fips_snmp_user initial v3 auth md5
fips_snmp_password
Done!
Administration Procedures
(local)
Issue 3 February 2007 613