Mtest:load - Agilent Technologies Infiniium 90000 Series Programmer's Manual

24
Mask Test Commands

:MTESt:LOAD

Command
:MTESt:LOAD "<filename>"
The :MTESt:LOAD command loads the specified mask file. The default path
for mask files is C:\Documents and Settings\All Users\Documents\
Infiniium\MASKS. To use a different path, specify the complete path and
file name.
<filename> An MS- DOS compatible name of the file, a maximum of 254 characters
long (including the path name, if used).
Example
This example loads the mask file named "140md_itu_1.msk".
myScope.WriteString _
":MTEST:LOAD ""c:\Documents and Settings\All Users\Documents\Infiniium\
masks\140md_itu_1.msk"""
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 457