Function<F>:Square - Agilent Technologies Infiniium 90000 Series Programmer's Manual

17
Function Commands
:FUNCtion<F>:SQUare
Command
:FUNCtion<F>:SQUare <operand>
The :FUNCtion<F>:SQUare command takes the square value of the
operand.
<operand> {CHANnel<N> | DIFF<P> | COMMonmode<P> | FUNCtion<F> |
WMEMory<N> | MTRend | MSPectrum}
See the discussion of possible operands in the introduction to
"Function Commands," starting on page 319.
Example
This example turns on the square value command using channel 3.
myScope.WriteString ":FUNCtion1:SQUARE CHANNEL3"
358 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
Chapter 17,