33
Trigger Commands
:TRIGger:SEQuence:RESet:EVENt
Command
:TRIGger:SEQuence:RESet:EVENt {CHANnel<N>}, { HIGH | LOW | DONTcare }
This command defines the logical pattern used for an event Reset
condition.
You can specify for each channel (1- 4) whether you want the value to be
high (1), low (0), or you don't care (X).
<N>
An integer, 1- 4.
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
889