Measure:rjdj:mode - Agilent Technologies Infiniium 90000 Series Programmer's Manual

25
Measure Commands

:MEASure:RJDJ:MODe

Command
This command is only available when the N5400A/N5401A Software is installed.
N O T E
:MEASure:RJDJ:MODe {TIE | PERiod | NUI[,<ui>]}
The :MEASure:RJDJ:MODe command sets the RJDJ measurement mode. If
NUI is selected then <ui> selects the number of unit intervals (for
example: :MEASure:RJDJ:MODe NUI,5.
Example
This example sets the RJDJ mode to TIE.
myScope.WriteString ":MEASURE:RJDJ:MODe TIE"
Query

:MEASure:RJDJ:MODe?

The :MEASure:RJDJ:MODe? query returns the mode of the RJDJ
measurements.
628 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference