Sbus<N>:Spi:frame:state - Agilent Technologies Infiniium 90000 Series Programmer's Manual

28
Serial Bus Commands
:SBUS<N>:SPI:FRAMe:STATe
Command
:SBUS<N>:SPI:FRAMe:STATe <value>
<value> ::= {LOW | HIGH}
The :SBUS<N>:SPI:FRAMe:STATe command sets the SPI trigger frame state.
<N>
An integer, 1- 4.
Query
:SBUS<N>:SPI:FRAMe:STATe?
The :SBUS<N>:SPI:FRAMe:STATe? query returns the current SPI frame
state.
Returned Format
[:SBUS<N>:SPI:FRAMe:STATe] <value><NL>
See Also
• ":SBUS<N>:SPI:SOURce:FRAMe" on page 752
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 749