Measure:bperiod - Agilent Technologies Infiniium 90000 Series Programmer's Manual

25
Measure Commands

:MEASure:BPERiod

Command
:MEASure:BPERiod <source>, <idle time>
The :MEASure:BPERiod command measures the time between the
beginning of a burst and the beginning of the next burst. The idle time is
the minimum time between bursts.
<source>
{CHANnel<N> | FUNCtion<F> | WMEMory<N>}
<N>
CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F> FUNCtion<F> is an integer, 1- 16.
<idle time>
Minimum amount of idle time between bursts.
Example
This example measures the burst period between two bursts on channel 4
(and with an idle time of 5 microseconds)
myScope.WriteString ":MEASURE:BPERiod CHAN4, 5e-6"
Query
:MEASure:BPERiod? <source>, <idle time>
The :MEASure:BPERiod? query returns the burst period time.
484 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference