27
Root Level Commands
:BLANk
Command
:BLANk {CHANnel<N> | BUS<N> | DIGital<M> | FUNCtion<F> | HISTogram
| WMEMory<N> | CLOCk | MTRend | MSPectrum | EQUalize | ALL}
The :BLANk command turns off an active channel, function, histogram,
waveform memory, measurement trend, measurement spectrum, or
Feed- Forward Equalized waveform. The :VIEW command turns them on.
<N>
An integer, 1- 4.
<F>
An integer, 1- 16.
<M>
An integer, 0- 15.
Example
This example turns off channel 1.
myScope.WriteString ":BLANk CHANnel1"
See Also
•
":VIEW"
on page 736
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
713