Agilent Technologies Infiniium 90000 Series Programmer's Manual page 105

Table 4
Bit
DDE
QYE
RQL
OPC
OPER
RQS
MSS
ESB
MAV
MSG
USR
TRG
WAIT TRIG
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
Status Reporting Bit Definition (continued)
Description
Device Dependent Error
Query Error
Request Control
Operation Complete
Operation Status Register
Request Service
Master Summary Status
Event Status Bit
Message Available
Message
User Event Register
Trigger
Wait for Trigger
Status Reporting
Definition
Indicates if the device was unable to complete
an operation for device-dependent reasons.
Indicates if the protocol for queries has been
violated.
Indicates if the device is requesting control.
Indicates if the device has completed all
pending operations.
Indicates if any of the enabled conditions in the
Operation Status Register have occurred.
Indicates that the device is requesting service.
Indicates if a device has a reason for
requesting service.
Indicates if any of the enabled conditions in the
Standard Event Status Register have occurred.
Indicates if there is a response in the output
queue.
Indicates if an advisory has been displayed.
Indicates if any of the enabled conditions have
occurred in the User Event Register.
Indicates if a trigger has been received.
Indicates the oscilloscope is armed and ready
for trigger.
6
105