Agilent Technologies Infiniium 90000 Series Programmer's Manual page 671

25
Measure Commands
Example This example places the current unit interval of the channel 1 waveform
in the numeric variable, varValue, then prints the contents of the variable
to the computer's screen.
myScope.WriteString ":SYSTEM:HEADER OFF" ' Response headers off.
myScope.WriteString ":MEASURE:UNITINTERVAL? CHANNEL1"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 671