Channel<N>:Probe:gain - Agilent Technologies Infiniium 90000 Series Programmer's Manual

12
Channel Commands
:CHANnel<N>:PROBe:GAIN
Command
:CHANnel<N>:PROBe:GAIN {X1 | X10}
This command is valid only for the 1154A probe.
N O T E
The :CHANnel<N>:PROBe:GAIN command sets the 1154A probe input
amplifier gain.
If an 1154A probe is not connected to the channel you will get a settings
conflict error.
<N> An integer, 1- 4.
Example
This example sets the probe gain for channel 1 to times 10.
myScope.WriteString ":CHANNEL1:PROBE:GAIN X10"
Query
:CHANnel<N>:PROBe:GAIN?
The :CHANnel<N>:PROBe:GAIN? query returns the current probe gain
setting for the selected channel.
Returned Format
[:CHANnel<N>:PROBe:GAIN] {X1 | X10}<NL>
228 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference