What's New In Version 3.11 - Agilent Technologies Infiniium 90000 Series Programmer's Manual

1
What's New

What's New in Version 3.11

New command descriptions for Version 3.11 of the Infiniium
90000A/90000X Series oscilloscope software appear below.
New Commands
Command
:CHANnel<N>:ISIM:PEXTracti
on (see
:MEASure:HISTogram:MODE
(see
Changed
Commands
Command
:BUS:B<N>:TYPE (see
page
:FUNCtion<N>:FFT:WINDow
(see
:MEASure:JITTer:SPECtrum:W
INDow (see
40
page 210)
page 552)
176)
page 336)
page 569)
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
Description
Selects a channel's InfiniiSim port extraction.
Returns the measurement histogram's Mode value.
Description
The MPHY protocol type has been added for the MIPI M-PHY
serial decode selection.
The HAMMing window mode is now a valid selection.
The HAMMing window mode is now a valid selection.