Agilent Technologies Infiniium 90000 Series Programmer's Manual page 579

25
Measure Commands
<result_state> If SENDvalid is ON, the result state is returned with the measurement
result. See the :MEASure:RESults table in this chapter for a list of the
result states.
Example This example places the current value of N cycle jitter in the numeric
variable, varValue, then prints the contents of the variable to the
computer's screen.
myScope.WriteString ":SYSTEM:HEADER OFF" ' Response headers off.
myScope.WriteString ":MEASURE:NCJITTER? CHANNEL1,RIS,5,1"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 579