25
Measure Commands
:MEASure:FFT:PEAK2
Command
:MEASure:FFT:PEAK2 <2nd_peak_number>
The :MEASure:FFT:PEAK2 command sets the peak number of the second
peak for FFT measurements. The source is specified with the
:MEASure:SOURce command as FUNCtion<F> or WMEMory<N>.
<2nd_peak
An integer, 1 to 100 specifying the number of the second peak.
_number>
<N>
WMEMory<N> is an integer, 1- 4.
<F>
FUNCtion<F> is an integer, 1- 16.
Query
:MEASure:FFT:PEAK2?
The :MEASure:FFT:PEAK2? query returns the peak number currently set
as the second peak.
Returned Format
[:MEASure:FFT:PEAK1] <2nd_peak_number><NL>
See Also
:MEASure:FFT:THReshold
Also see the example for :MEASure:FFT:DFRequency in this chapter.
540
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference