25
Measure Commands
<value>
The width of the first negative pulse on the screen using the
mid- threshold levels of the waveform.
<result_state>
If SENDvalid is ON, the result state is returned with the measurement
result. See the :MEASure:RESults table in this chapter for a list of the
result states.
Example
This example places the current width of the first negative pulse on the
screen in the numeric variable, varWidth, then prints the contents of the
variable to the computer's screen.
myScope.WriteString ":SYSTem:HEADer OFF"
' Response headers off.
myScope.WriteString ":MEASure:NWIDth? CHANnel1"
varWidth = myScope.ReadNumber
Debug.Print FormatNumber(varWidth, 0)
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
595