Trigger:transition:type - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:TRANsition:TYPE

Command
:TRIGger:TRANsition[{1 | 2}]:TYPE {RISetime | FALLtime}
This command lets you select either a rise time or fall time transition
violation trigger event.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
Query
:TRIGger:TRANsition:TYPE?
The query returns the currently defined transition type for the trigger
transition violation.
Returned Format
[:TRIGger:TRANsition:TYPE] {RISetime | FALLtime}<NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 913