Function<F>:Delay - Agilent Technologies Infiniium 90000 Series Programmer's Manual

17
Function Commands
:FUNCtion<F>:DELay
(Delay)
Command
:FUNCtion<F>:DELay <operand>,<delay_time>
The :FUNCtion<F>:DELay command adds the provided time to the X origin
of the source waveform, effectively shifting the function waveform in time.
<F> An integer, 1- 16, representing the selected function.
<operand> {CHANnel<n> | DIFF<P> | COMMonmode<P> | FUNCtion<F> |
WMEMory<n> | MTRend | MSPectrum}
See the discussion of possible operands in the introduction to
"Function Commands," starting on page 319.
<delay_time>
Time, in seconds, set for the delay.
Example
This example sets function 2 to be the waveform from channel1, delayed
by 100 ps.
myScope.WriteString ":FUNCtion2:DELay CHANnel1,100E-12"
328 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
Chapter 17,