Bus<N>:Clock - Agilent Technologies Infiniium 90000 Series Programmer's Manual

10
Bus Commands
:BUS<N>:CLOCk
Command
:BUS<N>:CLOCk {CHANnel<N> | DIGital<M> | NONE}
The BUS commands only apply to the MSO oscilloscopes.
N O T E
The :BUS<N>:CLOCk command sets the digital or analog channel used as
the clock for decoding the bus values.
<M>
An integer, 0- 15.
<N>
An integer, 1- 4.
<O> An integer, 1- 4.
Example This example sets the clock to channel 1 for bus 1.
myScope.WriteString ":ENABLE DIGITAL"
myScope.WriteString ":BUS1:CLOCK CHANNEL1"
Query
:BUS<N>:CLOCK?
The :BUS<N>:CLOCk query returns the channel being used for the
specified bus.
Returned Format
[:BUS<N>:CLOCk] {CHANnel<O> | DIGital<M> | NONE}<NL>
180 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference