Agilent Infiniium 90000 Series Oscilloscopes
Programmer's Reference
21
Limit Test Commands
:LTESt:FAIL
:LTESt:LLIMit
:LTESt:MEASurement
:LTESt:RESults?
:LTESt:TEST
:LTESt:ULIMit
The Limit Test commands and queries control the limit test features of the
oscilloscope. Limit testing automatically compares measurement results
with pass or fail limits. The limit test tracks up to four measurements. The
action taken when the test fails is also controlled with commands in this
subsystem.
406
407
408
409
410
411
s1
405