What's New In Version 4.10 - Agilent Technologies Infiniium 90000 Series Programmer's Manual

What's New in Version 4.10

New command descriptions for Version 4.10 of the Infiniium 90000 Series
oscilloscope software appear below.
New Commands
Command
:MEASure:NOISe:METHod
(see
:MEASure:NOISe:REPort (see
page
:MEASure:RJDJ:METHod (see
page
:MEASure:RJDJ:REPort (see
page
:MEASure:TIEFilter:SHAPe
(see
Changed
Commands
Command
:MEASure:NOISe:ALL (see
page
:MEASure:RJDJ:ALL (see
page
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
page 585)
586)
627)
630)
page 660)
581)
618)
Description
Lets you select the method for random noise (RN) analysis,
either the SPECtral method or BOTH the spectral and tail fit
methods.
When BOTH is selected for :MEASure:NOISe:METHod, you can
select SPECtral or TAILfit to specify which method is used for
the reports.
Lets you select the method for random jitter (RJ) analysis, either
the SPECtral method or BOTH the spectral and tail fit methods.
When BOTH is selected for :MEASure:RJDJ:METHod, you can
select SPECtral or TAILfit to specify which method is used for
the reports.
Specifies the shape of the TIE filter edge(s).
Description
New results can be returned depending on the
:MEASure:NOISe:METHod and :MEASure:NOISe:REPort
settings.
New results can be returned depending on the
:MEASure:RJDJ:METHod and :MEASure:RJDJ:REPort settings.
1
What's New
35