Step 3. Verify The Oscilloscope Connection - Agilent Technologies Infiniium 90000 Series Programmer's Manual

2
Setting Up

Step 3. Verify the oscilloscope connection

Make sure the Agilent Infiniium software is running on the oscilloscope. It must be running
N O T E
before you can make a connection.
1
2
46
On the controller PC, click on the Agilent IO Control icon in the
taskbar and choose Agilent Connection Expert from the popup menu.
In the Agilent Connection Expert application, instruments connected to
the controller's USB and GPIB interfaces should automatically appear.
(You can click Refresh All to update the list of instruments on these
interfaces.)
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference