Trigger:comm:bwidth - Agilent Technologies Infiniium 90000 Series Programmer's Manual

33
Trigger Commands

:TRIGger:COMM:BWIDth

Command
:TRIGger:COMM:BWIDth <bwidth_value>
The :TRIGger:COMM:BWIDth command is used to set the width of a bit for
your waveform. The bit width is usually defined in the mask standard for
your waveform.
<bwidth_value>
A real number that represents the width of a bit.
Query
:TRIGger:COMM:BWIDth?
The query returns the current bit width.
Returned Format
[:TRIGger:COMM:BWIDth] <bwidth_value><NL>
848 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference