Agilent Technologies Infiniium 90000 Series Programmer's Manual page 603

25
Measure Commands
<value> Phase angle from the first edge on the first source to the first edge on the
second source.
<result_state>
If SENDvalid is ON, the result state is returned with the measurement
result. See the :MEASure:RESults table in this chapter for a list of the
result states.
Example
This example places the current phase angle value between channel 1 and
channel 2 in the variable, varValue, then prints the contents of the
variable to the computer's screen.
myScope.WriteString ":SYSTem:HEADer OFF" ' Response headers off.
myScope.WriteString ":MEASure:PHASe? CHANnel1,CHANnel2"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 603