33
Trigger Commands
:TRIGger:STATe:LTYPe
Command
:TRIGger:STATe[{1 | 2}]:LTYPe {AND | NAND}
This command defines the state trigger logic type. If the logic type is set
to AND, then a trigger is generated on the edge of the clock when the
input waveforms match the pattern specified by the :TRIGger:STATe:LOGic
command. If the logic type is set to NAND, then a trigger is generated on
the edge of the clock when the input waveforms do not match the
specified pattern.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
Query
:TRIGger:STATe:LTYPe?
The query returns the currently specified state trigger logic type.
Returned Format
[:TRIGger:STATe:LTYPe] {AND | NAND}<NL>
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
903