33
Trigger Commands
:TRIGger:GLITch:SOURce
Command
:TRIGger:GLITch[{1 | 2}]:SOURce {CHANnel<N> | DIGital<M>}
This command sets the source for the glitch trigger mode.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N>
An integer, 1- 4.
<M>
An integer, 0- 15. Digital channels are available on mixed- signal
oscilloscopes.
Query
:TRIGger:GLITch:SOURce?
The query returns the currently selected source for the glitch trigger
mode.
Returned Format
[:TRIGger:GLITch:SOURce] {CHANnel<N> | DIGital<M>}<NL>
868
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference