Acquire:bandwidth - Agilent Technologies Infiniium 90000 Series Programmer's Manual

9
Acquire Commands

:ACQuire:BANDwidth

(Enhanced bandwidth or noise reduction option only)
Command
This command is only available with Enhanced Bandwidth or Noise Reduction options.
N O T E
:ACQuire:BANDwidth {AUTO | MAX | <bandwidth>}
The :ACQuire:BANDwidth command changes the bandwidth frequency
control for the acquisition system.
• AUTO — The bandwidth is automatically selected based on the sample
• MAX — Sets the oscilloscope to the hardware bandwidth limit and
• <bandwidth> — a real number representing the bandwidth of the
Model
DSOX/DSAX96204Q
DSOX/DSAX95004Q
DSOX/DSAX93304Q
DSOX/DSAX92504Q
DSOX/DSAX92004Q
DSOX/DSAX93204A
DSOX/DSAX92804A
DSOX/DSAX92504A
DSOX/DSAX92004A
DSOX/DSAX91604A
DSO/DSA91304A
DSO/DSA91204A
DSO/DSA90804A
DSO/DSA90604A
DSO/DSA90404A
DSO/DSA90254A
150
rate setting in order to make a good a trade- off between bandwidth,
noise, and aliasing.
disables the bandwidth filter.
bandwidth filter whose range of values depends on the model number
of your oscilloscope.
Bandwidth Filter Values
The maximum bandwidth down to 1 GHz in 1 GHz increments.
The maximum bandwidth down to 1 GHz in 1 GHz increments.
13E09, 12E09, 10E09, 8E09, 6E09, 4E09, 3E09, 2.5E09, 2E09, 1E09
12E09, 10E09, 8E09, 6E09, 4E09, 3E09, 2.5E09, 2E09, 1E09
8E09, 6E09, 4E09, 3E09, 2.5E09, 2E09, 1E09
6E09, 4E09, 3E09, 2.5E09, 2E09, 1E09
4E09, 3E09, 2.5E09, 2E09, 1E09
2.5E09, 2E09, 1E09
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference