Sbus<N>:Spi:source:miso - Agilent Technologies Infiniium 90000 Series Programmer's Manual

:SBUS<N>:SPI:SOURce:MISO
Command
:SBUS<N>:SPI:SOURce:MISO <source>
<source> ::= {CHANnel<N> | FUNCtion<F> | WMEMory<N> | DIGital<M>}
The :SBUS<N>:SPI:SOURce:MISO command sets the source for the SPI
serial MISO data.
<N>
CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F> FUNCtion<F> is an integer, 1- 16.
<M>
An integer, 0- 15. Digital channels are available on mixed- signal
oscilloscopes.
Query
:SBUS<N>:SPI:SOURce:MISO?
The :SBUS<N>:SPI:SOURce:MISO? query returns the current source for the
SPI serial MISO data.
Returned Format
[:SBUS<N>:SPI:SOURce:MISO] <source><NL>
See Also •
•
•
•
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
":SBUS<N>:SPI:SOURce:MOSI"
":SBUS<N>:SPI:SOURce:DATA"
":SBUS<N>:SPI:SOURce:CLOCk"
":SBUS<N>:SPI:SOURce:FRAMe"
on page 754
on page 751
on page 750
on page 752
28
Serial Bus Commands
753