:SBUS<N>:SPI:TYPE
Command
:SBUS<N>:SPI:TYPE <value>
<value> ::= {WIRE2 | WIRE3 | WIRE4}
The :SBUS<N>:SPI:TYPE command specifies whether the type of SPI to
decode.
<N>
An integer, 1- 4.
Example
To set the 3- wire SPI decode type:
myScope.WriteString ":SBUS1:SPI:TYPE WIRE3"
Query
:SBUS<N>:SPI:TYPE?
The :SBUS<N>:SPI:TYPE? query returns the decode type setting.
Returned Format
[:SBUS<N>:SPI:TYPE] <value><NL>
See Also
•
•
•
•
•
•
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
":SBUS<N>:SPI:BITorder"
":SBUS<N>:SPI:SOURce:CLOCk"
":SBUS<N>:SPI:SOURce:DATA"
":SBUS<N>:SPI:SOURce:FRAMe"
":SBUS<N>:SPI:SOURce:MISO"
":SBUS<N>:SPI:SOURce:MOSI"
on page 746
on page 750
on page 751
on page 752
on page 753
on page 754
28
Serial Bus Commands
755